Maintenance
Clean equipment with a soft, dry cloth. Do not use alcohol or
VoiceStation 100 Installation Instructions and User’s Guide
In Case of Difficulties
No Dial Tone
▼Check that all connections are correct and tight.
▼Make sure the short cable is connected to a standard analog phone line.
▼Try a different telephone line.
Telephone Does Not Ring
▼Adjust the Ringer with the Volume Up button.
Short Silences, Echoes, or Clipped Speech
▼Don’t move VoiceStation™ 100 while it’s in use.
▼Keep your hands away from the unit during calls.
▼Keep papers, cups, coffee pots,
and other objects away from the unit.
▼At the beginning of a call, allow each speaker present to speak in turn for a few moments to enable VoiceStation 100’s electronics
to adjust to the acoustic environment.
▼The other party may be using low quality equipment or a
Muffled or "In a Well" Reception
▼Speak closer to the unit so the microphones can pick up your speech.
▼Add more sound absorbing surfaces to the room, (carpets, curtains, etc.).
Excessive Noise
▼Noisy equipment such as a computer, or fan may make it difficult to hear the other party. Both parties should turn off noisy equipment.
▼Try calling again to see if a different line provides a better connection.
Physical Damage
▼If physical damage causes internal parts to become accessible, disconnect VoiceStation 100 immediately.
Do not reconnect VoiceStation 100
to the network until it has been repaired by a Polycom authorized repair center.
6