Oricom CARE80 user manual Installation

Page 7

Installation

Method B. Attach directly to a wall

1.Drill two holes vertically, one above the other, 83mm apart, and leave the screws protruding from the wall by 5mm.

2.Follow steps 1 and 2 above.

3.Then press down and slide the bracket upward until the tabs snap into place.

4.Plug one end of the telephone cable into the TEL. LINE jack at the back of the base.

5.Plug the other end of the telephone cable into the telephone socket, then align the base’s keyhole slots with the screws and slide the phone downward to secure it.

5

Care80 user manual.indd

5

2009-11-5 17:38:00

Image 7
Contents CARE80 2009-11-5 Table of contents Carefully as it contains detailed information on General InformationNeed to be aware REN RN for New Zealand Wall Mounting InstallationConnecting the telephone Handset in place when the phone isInstallation Location of Controls Operation Take two different calls at the same time Ringer Volume ControlRecall and call waiting To Turn on Telstra call waiting AustraliaReceiver volume control Volume ControlHearing Aid Compatibility Storing One-touch Memories Dialing using One-touch MemoriesDialing using Two-touch Memories MemoryWarranty Consumer Support and TroubleshootingCleaning and care Warranty Information AustraliaExclusion and limitation of liability 2009-11-5 Australia