CPU Installation Procedure
The following illustration shows CPU installation components.
1.Install your CPU. Pull up the lever away from the socket and lift up to
2.Locate the CPU cut edge (the corner with the pin hold noticeably missing). Align and insert the CPU correctly.
3.Press the lever down and apply thermal grease on
top of the CPU.
4.Put the CPU Fan down on the retention module and snap the four retention legs of the cooling fan into place.
5.Flip the levers over to lock the heat sink in place and connect the CPU cooling Fan power cable to the CPUFAN connector. This completes the installation.
To achieve better airflow rates and heat dissipation, we suggest that you use a high quality fan with 4800 rpm at least. CPU fan and heatsink installation procedures may vary with the type of CPU fan/heatsink supplied. The form and size of fan/heatsink may also vary.
84
