Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.

CMOS Setup Utility

Integrated Peripherals

Integrated Peripherals

 

Item Help

 

 

 

Onboard SATA Controller

Enabled

 

 

 

 

Onboard SATA Mode

RAID

Options

Onboard USB Controller

Enabled

Enabled

Legacy USB Support

Enabled

Disabled

USB Storage Emulation

Auto

 

Onboard Audio Controller

Enabled

 

Onboard LAN Controller

Enabled

 

Onboard LAN Option ROM

Disabled

 

 

 

 

↑↓Move EnterSelect +/-/Value F10Save ECSExit

F1General Help

F9Load Default Settings

OnBoard SATA Mode (RAID)

Use this item to select the onboard SATA mode.

OnBoard SATA Controller (Enabled)

This item allows you to enable or disable the onboard SATA controller.

OnBoard USB Controller (Enabled)

Use this item to enable or disable the use of USB controller.

Legacy USB Support (Enabled)

Use this item to enable or disable support for legacy USB devices. Setting to Auto allows the system to detect the presence of USB device at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.

USB Storage Emulation (Auto)

If Auto, USB device equal or less than 2GB will be emulated as Floppy and remaining as hard drive. Forced FDD option can be used to force a HDD formatted drive to boot as FDD (Ex.ZIP drive).

Onboard Audio Controller (Enabled)

This item enables or disables the onboard audio controller.

Onboard LAN Controller (Enabled)

Use this item to enable or disable the Onboard LAN.

Onboard LAN Option ROM (Disabled)

This item enables or disables the onboard LAN option ROM function.

Press <Esc> to return to the main menu setting page.

25

Page 31
Image 31
Acer M5150 manual Integrated Peripherals