Programmable Settings
Programming using the function keys
You can program features using the functions keys ({F1}, {F2} and {F3} keys).
For your reference, a chart of all programmable functions is printed below. Details for each item can be found on the corresponding pages.
Important:
L Before programming, make sure the unit is not being used.
1
2
3
4
5
6
7
8
To begin programming, press {MENU} ({F2} key).
Press {<} or {>} to scroll through the main menu.
Press {SELECT} ({F3} key) to select the desired main menu item.
Press {<} or {>} to scroll through the
Press {SELECT} ({F3} key) to select the desired
Press {<} or {>} repeatedly to select the desired setting.
Press {SAVE} ({F3} key) to save the new setting.
Press {STOP} to exit programming mode.
Note:
L The default settings are indicated by *.
Main menu |
| Option | Reference page | |
for programming | ||||
|
|
| ||
Caller list | - | - | page 18 | |
Ringer | Ringer volume | Low, Medium, High*, Off | page 23 | |
setting |
|
|
| |
Ringer tone | Pattern | page 23 | ||
| ||||
Initial | LCD contrast | Level | page 23 | |
setting |
|
|
| |
Key tone | On*, Off | page 25 | ||
| ||||
| Set area code | - | page 24 | |
| Set recall time | 900 ms, 700 ms, 600 ms, | page 24 | |
|
| 400 ms, 300 ms, 250 ms, |
| |
|
| 200 ms, 160 ms, 110 ms, |
| |
|
| 100 ms*, 90 ms, 80 ms |
| |
|
|
|
|
During programming:
L To exit programming, press {STOP} at any time.
L You can press {SET} instead of pressing {SELECT} ({F3} key) and {SAVE} ({F3} key). L To go back to the previous menu, press {BACK} ({F1} key).
L A Qindicates the current setting.
22