Programmable Settings
Telephone settings
Recall time
The recall time depends on your telephone exchange or host PBX.
1 Press {MENU} ({F2} key), then press {#}, {1}, {2}, {1}.
2 Press {0} to {9}, {*} or {#} to select the desired setting.
{1}: 900 ms {2}: 700 ms {3}: 600 ms
{4}: 400 ms {5}: 300 ms {6}: 250 ms
{7}: 200 ms {8}: 160 ms {9}: 110 ms
{*}: 90 ms {0}: 100 ms {#}: 80 ms (ms=milliseconds)
3 Press {SAVE} ({F3} key), then press {STOP}.
Note:
L If the unit is connected via a PBX, certain PBX functions (call transferring, etc.) may not work correctly. Consult your PBX supplier for the correct setting.
L You can access Telstra’s “EASY CALL” service by having the recall time set at 100 ms, and then follow Telstra’s “EASY CALL” instructions to operate this service (For Australian users only).
L If you use Call Waiting, change the recall time to 600 ms. If you use PBX functions, ask the PBX administrator for the appropriate recall time then set it (For New Zealand users only).
Storing your area code
We recommend storing your area code before using Caller ID (page 17). Calls from the same area will be recorded in the caller list without the area code. You do not have to remove it before calling back the caller or storing in the phonebook.
1 Press {MENU} ({F2} key), then press {#}, {2}, {5}, {5}.
2 Enter your area code (max. 8 digits).
L To correct a digit, press {> } ({F1} key) or { >} ({F2} key) to move the cursor, then press {CLEAR}. Enter the correct number.
3 Press {SAVE} ({F3} key), then press {STOP}.
To erase your area code
Press and hold {CLEAR} in step 2, press {SAVE} ({F3} key), then press {STOP}.
Note:
L The use of this feature can prevent a National Call from being dialled. For example, the “03” for South Island callers will be omitted and will therefore prevent a National Call to other areas of the South Island. (For New Zealand users)
24