Programming
Special programming
Alarm
An alarm sounds at the set time for 3 minutes once or daily. Alarm can be set for each handset.
Important:
RSet the date and time beforehand (page 12).
1M
N
2MbN: “Handset Setup” a M
N
3 MbN: “Alarm” a M
N
4MbN: Select the desired alarm option. a
M
N
5Enter the desired date and month.
6 Set the desired time. a M
N
7MbN: Select the desired alarm tone. a
M
N
R We recommend selecting a different ringer tone from the one used for outside calls.
8M
N a M
N
R When the alarm is set, 
is displayed.
Note:
RTo stop the alarm, lift the handset and
press M
N or place the handset on the base unit or charger.
RWhen the handset is in use, the alarm will not sound until the handset is in standby mode.
Changing the unit’s region setting/Resetting the base unit
1M
N
2MbN: “Base Unit Setup” a M
N
3 MbN: “Country” a M
N
4MbN: Select the desired country. a
M
N
“Other” = countries except Czech and Slovakia
“Česká republika” = Czech “Slovensko” = Slovakia
5MbN: “Yes” a M
N a M
N
Note:
RThe following items will be deleted or reset to their default settings:
–Base unit settings (page 19)
–One touch eco mode (page 13)
–Caller list
–Voice mail messages
RThe following items will be retained:
–Date and time
–Repeater mode
RIf you select the desired country in step 4, the following default settings will be changed for the selected country’s default settings:
–Recall/flash time (page 19)
–Display language (page 18)
RAfter changing the unit’s region setting/
resetting the base unit, 
may flash on the handset momentarily. This is normal and
the handset can be used once 
stops flashing.
Increasing the range of the base unit
You can increase the signal range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on page 4. Contact your Panasonic dealer for details.
Important:
RBefore registering the repeater to this base unit, you must turn the repeater mode on.
20
2012/09/19 15:02:00