Panasonic KX-TG2711FX, KX-TG2712FX operating instructions For your safety

Page 5

Important Information

For your safety

To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product.

WARNING

Power connection

RUse only the power source marked on the product.

RDo not overload power outlets and extension cords. This can result in the risk of fire or electric shock.

RCompletely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.

RRegularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.

RUnplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact an authorised service centre.

RUnplug from power outlets and never touch the inside of the product if its casing has been broken open.

RNever touch the plug with wet hands. Danger of electric shock exists.

Installation

RTo prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.

RDo not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.

RDo not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects.

Operating safeguards

RUnplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners.

RDo not disassemble the product.

RDo not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use.

Medical

RConsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. (The product operates in the frequency range of

1.88 GHz to 1.90 GHz, and the RF transmission power is 250 mW (max.).)

RDo not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

CAUTION

Installation and location

RNever install telephone wiring during an electrical storm.

RNever install telephone line jacks in wet locations unless the jack is specifically designed for wet locations.

RNever touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

RUse caution when installing or modifying telephone lines.

RThe AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible.

RThis product is unable to make calls when:

5

TG271xFX(en-en)_0919_ver011.pdf 5

2012/09/19 15:01:59

Image 5
Contents Thank you for purchasing a Panasonic product Digital Cordless PhoneTable of Contents Model composition Accessory informationSupplied accessories For your future reference Additional/replacement accessoriesGeneral information For your safety Battery Important safety instructionsFor best performance Base unit location/avoiding noiseOther information SpecificationsRoutine care For business users in the European UnionFrequency range RF transmission powerCharger Operating conditionsBattery installation Setting upBattery charging ConnectionsBattery level During a power failureIcon Battery level High Medium Low Operation Operating timeDisplay ControlsHandset Base unitInitial settings Turning the power on/offRegion settings Display languageDialling mode One touch eco modeMbN Handset Setup a M N MbN Set Date & Time a M N MbN Base Unit Setup a M N MbN Dial Mode a M NAnswering calls Making callsUseful features during a call Copying phonebook entries Handset phonebookCopying all entries Scrolling through the display menus Programmable settingsMain menu Sub-menu Keytones *6 Auto Talk *7 OffČeská republika = 100 msec. Slovensko = 100 msec Same item using another handset. KX-TG2712Changing the unit’s region setting/Resetting the base unit AlarmSpecial programming Increasing the range of the base unitDect repeater Setting the repeater modeMbN Base Unit Setup a M N MbN Repeater Mode a M N Caller ID features Using Caller ID serviceCaller list Viewing the caller list and calling backStoring caller information to the phonebook Erasing caller informationMbN Erase or Erase All a MbN Add Phonebook a M NVoice mail service Transferring calls, conference calls IntercomHandset locator Character entry modes When the unit displays the character entry screenCharacter entry Cyrillic character table Extended 1 character tableExtended 2 character table General use Error messagesTroubleshooting Making/answering calls, intercom Programmable settingsBattery recharge Liquid damage Caller IDMbN Base Unit Setup a M N MbN Base Unit PIN a M N MbN Handset Setup a M N MbN Register H.set a M NRegistering a handset to the base unit Deregistering a handsetWall mounting Index 2012/09/19 2012/09/19 Romania FX-2/3Sales Department Czech Slovakia