Panasonic KX-TG2712FX Important safety instructions, For best performance, Battery, Environment

Page 6

Important Information

the handset batteries need recharging or have failed.

there is a power failure.

Battery

RWe recommend using the batteries noted on page 4. USE ONLY rechargeable

Ni-MH batteries AAA (R03) size.

RDo not mix old and new batteries.

RDo not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.

RExercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns.

RCharge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual.

ROnly use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode.

Important safety instructions

When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1.Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.

2.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

3.Do not use the telephone to report a gas leak in the vicinity of the leak.

4.Use only the power cord and batteries indicated in this manual. Do not dispose of

batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS

For best performance

Base unit location/avoiding noise

The base unit and other compatible Panasonic units use radio waves to communicate with each other.

RFor maximum coverage and noise-free communications, place your base unit:

at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment.

away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones.

facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.)

RCoverage and voice quality depends on the local environmental conditions.

RIf the reception for a base unit location is not satisfactory, move the base unit to another location for better reception.

Environment

RKeep the product away from electrical noise generating devices, such as fluorescent lamps and motors.

RThe product should be kept free from excessive smoke, dust, high temperature, and vibration.

RThe product should not be exposed to direct sunlight.

RDo not place heavy objects on top of the product.

RWhen you leave the product unused for a long period of time, unplug the product from the power outlet.

RThe product should be kept away from heat sources such as radiators, cookers, etc. It should not be placed in rooms where the temperature is less than 0 °C or greater

6

TG271xFX(en-en)_0919_ver011.pdf 6

2012/09/19 15:01:59

Image 6
Contents Digital Cordless Phone Thank you for purchasing a Panasonic productTable of Contents Accessory information Supplied accessoriesModel composition Additional/replacement accessories General informationFor your future reference For your safety For best performance Important safety instructionsBattery Base unit location/avoiding noiseRoutine care SpecificationsOther information For business users in the European UnionCharger RF transmission powerFrequency range Operating conditionsBattery charging Setting upBattery installation ConnectionsIcon Battery level High Medium Low During a power failureBattery level Operation Operating timeHandset ControlsDisplay Base unitRegion settings Turning the power on/offInitial settings Display languageMbN Handset Setup a M N MbN Set Date & Time a M N One touch eco modeDialling mode MbN Base Unit Setup a M N MbN Dial Mode a M NMaking calls Answering callsUseful features during a call Handset phonebook Copying phonebook entriesCopying all entries Main menu Sub-menu Programmable settingsScrolling through the display menus Keytones *6 Auto Talk *7 OffSame item using another handset. KX-TG2712 Česká republika = 100 msec. Slovensko = 100 msecSpecial programming AlarmChanging the unit’s region setting/Resetting the base unit Increasing the range of the base unitSetting the repeater mode MbN Base Unit Setup a M N MbN Repeater Mode a M NDect repeater Caller list Using Caller ID serviceCaller ID features Viewing the caller list and calling backMbN Erase or Erase All a Erasing caller informationStoring caller information to the phonebook MbN Add Phonebook a M NVoice mail service Intercom Handset locatorTransferring calls, conference calls When the unit displays the character entry screen Character entryCharacter entry modes Extended 1 character table Extended 2 character tableCyrillic character table Error messages TroubleshootingGeneral use Programmable settings Battery rechargeMaking/answering calls, intercom Caller ID Liquid damageRegistering a handset to the base unit MbN Handset Setup a M N MbN Register H.set a M NMbN Base Unit Setup a M N MbN Base Unit PIN a M N Deregistering a handsetWall mounting Index 2012/09/19 2012/09/19 FX-2/3 Sales Department Czech SlovakiaRomania