Panasonic KX-TSC14W Storing an Access Number in Your Voice Mail, Save MAILBOX# ?, Enter MAILBOX#

Page 35

Your mail box password

Ò

Storing an Access Number in Your Voice Mail

Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off.

1

2

3

4

5

Press (FUNCTION/EXIT).

Press (_) or (^) repeatedly until “SAVE MAILBOX# ?” is displayed.

Press (ß) OK/EDIT.

Press (_) or (^) to select the desired line, “LINE1” or “LINE2”.

Press (ß) OK/EDIT (NEXT key).

³“ENTER MAILBOX#” is displayed.

³The current number will be displayed, if it was stored beforehand.

11:50AM11/24

SAVE AUTO# ?

11:50AM11/24

SAVE MAILBOX# ?

11:50AM11/24

LINE1 1=NEXT

11:50AM11/24

LINE2 1=NEXT

11:50AM11/24

ENTER MAILBOX#

6

7

Enter your access phone number up to 32 digits.

³You may enter pauses*.

³If you misdial, press (CLEAR). Digits are erased from the right.

Press (ß) OK/EDIT (SAVE key).

³A beep sounds and the number is saved. ³The display will return to step 2. To

program the other line, start from step 3.

To return to the standby mode, press (FUNCTION/EXIT).

11:50AM11/24

1234567PPP8901 1=SAVE

11:50AM11/24

1234567PPP8901

SAVE MAILBOX#

Advanced Operation

³You can exit the programming mode any time by pressing (FUNCTION/EXIT).

*For quick access to your voice mail box by using (VOICE\MAIL), you may add pauses between your voice mail box access number and your mail box password in step 6.

Ex. 1-222-333-4444 PPPP 8888

Your voice mail box access number

Pauses

Pressing (REDIAL/PAUSE) once creates a 3.5 second delay and counts as one digit. The delay time depends on a telephone company.

35

Image 35

Contents KX-TSC14W Name and address of dealer Before Initial UseAttach your purchase receipt here For your future reference Serial No Date of purchaseOne Contents Useful Information OK/EDIT Location of ControlsJohn Smith DisplayNEW Calls No Items StoredConnecting the Handset/AC Adaptor SettingsConnect the telephone line cords to the unit as follows Connecting the Telephone Line CordTo connect a two-line telephone jack If you use the unit only as a single-line telephone To connect two single-line telephone jacksWith Transparent Plugs Connecting a Communication DeviceLCD Contrast ? Setting the LCD ContrastSave AUTO# ? Press or to select Tone or Selecting the Dialing ModeSET Dial Mode ? Tone 1=SAVELINE2 1=NEXT Selecting the Line ModeSET Line Mode ? LINE1 1=NEXTPress ß OK/EDIT to go to the next step Programming Summary of PreparationsPress or repeatedly until the desired function is displayed You can select AM/PM or military time by programming Time and Date AdjustmentSET Clock ? #=AM/PMEnter MONTH/DATE For Caller ID service users pRinger Volume ? Selecting the Ringer VolumeMaking Calls Using the speakerphoneTo release the hold What the line indicator meansTo redial the last number dialed To put a call on holdTalk into the MIC microphone Answering CallsUsing the Other Line During a Conversation ³To put both lines on hold, press Hold Conference CallDuring a conference call How caller information is displayed when a call is received Caller ID ServiceTo check the number of new calls Viewing the Caller List Using the Caller ListNEW Call Ex. When you search from the most recent callJohn White Lift the handset or press Calling Back from the Caller ListEditing a Caller’s Phone Number Press a memory station number Storing Caller List Phone Number in the Speed Dialer MemorySave in Auto Press AutoTo erase all entries in the Caller List Erasing Caller List InformationTo erase a speciﬁc caller from the Caller List AUTO=SAVE Speed DialerStoring Phone Numbers in the Speed Dialer Memory Enter Phone noClear Auto Dialing a Stored NumberTo erase a stored number PressVoice Mail Service Enter MAILBOX# Storing an Access Number in Your Voice MailEnter your access phone number up to 32 digits Save MAILBOX# ?On 1=SAVE Setting the Voice Mail ToneVoice Mail TONE? Follow the pre-recorded instructions Listening to Voice Mail MessagesVoice Mail Call Waiting Caller ID Feature Special FeaturesFor Call Waiting Service Users SET Flash Time ? Flash ButtonSelecting the ﬂash time Temporary Tone Dialing How to Use the Pause ButtonFor Rotary or Pulse Service Users For Analog PBX Line/Long Distance Service UsersAuto 1=SAVE Press or to select the desired settingLine Selection Line Selection ?Incoming Tone ? is displayed Incoming Call ToneIncoming Tone ? Illustration headset is a KX-TCA90 Using an Optional HeadsetConnecting an Optional Headset to the Unit During a conversation with an optional headset To adjust the headset receiver volume 4 levelsMaking/Answering Calls Wall Mounting Before Requesting Help ProblemRemedyAnswer a call ³The button has a double function asImportant Safety Instructions Useful Information Ringer Equivalence No. REN FCC and Other InformationUseful Information When you ship the product For product service