Panasonic X-TSC14B, KX-TSC14W Setting the Voice Mail Tone, Voice Mail TONE?, On 1=SAVE

Page 36

³A beep sounds and the setting is saved. ³The display will return to step 2. To

program the other line, start from step 3.

To return to the standby mode, press (FUNCTION/EXIT).

ÒVoice Mail Service

Setting the Voice Mail Tone

If your voice mail service sends a voice mail tone after a new message has ﬁnished recording, set to “ON”. “” icon will ﬂash on the display if a message was recorded in your mailbox. You will hear a series of voice mail tones then a dial tone after lifting the handset or pressing (SP-PHONE/HEADSET). (Contact your service provider about your service.) Set to “OFF” when:

—you do not subscribe to a voice mail service.

—your voice mail service does not send a voice mail tone, or —the unit is connected to a PBX.

Your phone comes from the factory set to “ON”.

Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off.

1	Press (FUNCTION/EXIT).
2	Press (_) or (^) repeatedly until
2	“VOICE MAIL TONE?” is displayed.
3	Press (ß) OK/EDIT.
	Press (_) or (^) to select the desired
4 line, “LINE1” or “LINE2”.
5	Press (ß) OK/EDIT (NEXT key).
6	Press (_) or (^) to select the desired
6	mode.
7	Press (ß) OK/EDIT (SAVE key).

11:50AM11/24

SAVE AUTO# ?

11:50AM11/24

VOICE MAIL TONE?

11:50AM11/24

LINE 1

LINE1 1=NEXT

11:50AM11/24

LINE 2

LINE2 1=NEXT

11:50AM11/24

ON 1=SAVE

³You can exit the programming mode any time by pressing (FUNCTION/EXIT).

36

Image 36

Contents KX-TSC14W Before Initial Use Attach your purchase receipt here For your future referenceSerial No Date of purchase Name and address of dealerOne Contents Useful Information Location of Controls OK/EDITDisplay NEW CallsNo Items Stored John SmithSettings Connecting the Handset/AC AdaptorConnecting the Telephone Line Cord To connect a two-line telephone jackConnect the telephone line cords to the unit as follows To connect two single-line telephone jacks If you use the unit only as a single-line telephoneConnecting a Communication Device With Transparent PlugsSetting the LCD Contrast Save AUTO# ?LCD Contrast ? Selecting the Dialing Mode SET Dial Mode ?Tone 1=SAVE Press or to select Tone orSelecting the Line Mode SET Line Mode ?LINE1 1=NEXT LINE2 1=NEXTProgramming Summary of Preparations Press or repeatedly until the desired function is displayedPress ß OK/EDIT to go to the next step Time and Date Adjustment SET Clock ?#=AM/PM You can select AM/PM or military time by programmingFor Caller ID service users p Enter MONTH/DATESelecting the Ringer Volume Ringer Volume ?Using the speakerphone Making CallsWhat the line indicator means To redial the last number dialedTo put a call on hold To release the holdAnswering Calls Talk into the MIC microphoneUsing the Other Line During a Conversation Conference Call During a conference call³To put both lines on hold, press Hold Caller ID Service How caller information is displayed when a call is receivedTo check the number of new calls Using the Caller List Viewing the Caller ListEx. When you search from the most recent call John WhiteNEW Call Calling Back from the Caller List Lift the handset or pressEditing a Caller’s Phone Number Storing Caller List Phone Number in the Speed Dialer Memory Save in AutoPress Auto Press a memory station numberErasing Caller List Information To erase a speciﬁc caller from the Caller ListTo erase all entries in the Caller List Speed Dialer Storing Phone Numbers in the Speed Dialer MemoryEnter Phone no AUTO=SAVEDialing a Stored Number To erase a stored numberPress Clear AutoVoice Mail Service Storing an Access Number in Your Voice Mail Enter your access phone number up to 32 digitsSave MAILBOX# ? Enter MAILBOX#Setting the Voice Mail Tone Voice Mail TONE?On 1=SAVE Listening to Voice Mail Messages Voice MailFollow the pre-recorded instructions Special Features For Call Waiting Service UsersCall Waiting Caller ID Feature Flash Button Selecting the ﬂash timeSET Flash Time ? How to Use the Pause Button For Rotary or Pulse Service UsersFor Analog PBX Line/Long Distance Service Users Temporary Tone DialingPress or to select the desired setting Line SelectionLine Selection ? Auto 1=SAVEIncoming Call Tone Incoming Tone ?Incoming Tone ? is displayed Using an Optional Headset Connecting an Optional Headset to the UnitIllustration headset is a KX-TCA90 To adjust the headset receiver volume 4 levels Making/Answering CallsDuring a conversation with an optional headset Wall Mounting ProblemRemedy Before Requesting Help³The button has a double function as Answer a callImportant Safety Instructions Useful Information FCC and Other Information Ringer Equivalence No. RENUseful Information For product service When you ship the product