Panasonic CF-P1Series First-time Operation, Install the battery pack, Latch, Arrow Mark

First-time Operation
1 Install the battery pack.	Battery Pack Cover
(1) Power off your computer and turn it over.
(2) Press position (A) to depress the battery pack cover
and then slide the latch, and remove the battery pack
cover.
NOTE	Latch	(A)
If the attached strap makes it difficult to remove the
	Arrow Mark
battery pack cover, unbuckle the strap and then re-
move the cover.

(3) Set the arrow mark of the battery in the direction shown in the figure, and then insert the battery pack into the battery pack compartment.

(4) Align the projecting part of the cover with the hole, at-	(A)
tach the cover at an angle, and then set the cover on the
body. Press position (A) to depress the battery pack
cover and then slide the latch to lock the cover.

NOTE

After attaching the battery pack cover, slide the latch all the way to the left so that CF-P1 can turn on after the power switch is pressed.

2 Connect your computer to a power outlet.

When the AC adaptor is connected to the computer, charg- ing begins automatically.

Charging Time: Approx. 3 hours

This computer is equipped with a memory backup battery which automatically charges from the fully-charged lithium- ion battery (main battery). This backup battery retains data in memory when the lithium-ion battery is removed, and takes 36 hours to charge when you first use this computer.

Latch

13