Panasonic CF-P1Series operating instructions Handling the Touchscreen, Aligning the Screen

Handling the Touchscreen

Use the provided stylus with CF-P1. Do not use an implement other than the stylus that comes with the computer.

Do not place any object on the surface or press down forcefully with sharp-pointed objects (e.g., nails), or hard objects that can leave marks (e.g., pencils and ball point pens).

Do not operate the computer when such things as dust are on the LCD. Do not allow substances such as oil to contact the LCD. The cursor may not work properly in such cases.

Aligning the Screen

Align the screen if the cursor does not correctly move to the position where the stylus touches the screen of the computer.

1

2

Tap - [Settings] - [System] tab - [Screen].

Tap [Align Screen].

3 "+" is displayed in the center, upper left, lower left, lower right, and upper right portions of the screen, in that order.

Each time the "+" mark is displayed, tap the center of the "+" mark with the stylus.

The alignment procedure is executed after the five “+” marks are touched.

NOTE

<For the CF-P1P3 series>

You can also display the alignment screen when (Mode key) + the cursor control are pushed.

<For the CF-P1P1 series>

You can also display the alignment screen when PF (PF key) + the cursor control are pushed.

21