Panasonic CF-P1Series Connecting Peripherals, Network, Sounds, Program Buttons

Dealing with Problems

Connecting Peripherals

Peripheral is not recog- nized even after driver is installed.

Remove cards or other peripherals, and push the reset switch.

Network

Cannot connect to the net- Check the server information and network settings. work.

Sounds

Quality of recorded sound	Tap	- [Settings] - [Personal] tab - [Input] - [Options] tab
is poor.	- [Voice recording format], and select a higher frequency.
Play sound is recorded	Playsound (sound from the speaker) is being picked up
even though the Mix	and recorded by the microphone. If you want to avoid
playsound checkmark is	playsound recording completely, connect the headset or
off.	the headphone.
Noise in recording or play-	If a load is applied during recording or playback, for
back sound.	example when the SD memory card is disconnected or
	connected, then noise in the recording or playback will
	result. In this event, stop the recording or playback, and
	restart after closing other applications.
Program Buttons
The program assigned to	When the program display of a start menu is changed
the button does not start.	after assigning a program, if you press a button, that pro-
	gram may not start. In that case, tap		- [Settings] -
	[System] tab - [Panasonic Settings] - [Buttons] tab, and
	re-assign the program.
Character Input < Only for CF-P1P1 series >
Entering characters	Characters can be input using the input panel.
	(	page 23)

46