Panasonic CF-P1Series This concludes the first-time use operation guidelines

3 Turn your computer on	Reset Switch
(1) Using the provided stylus, push the center of the reset switch straight
in for 1 second. If the DC-IN Jack's cover makes it difficult to
push the reset switch, push the cover in a little as you push the
switch.

CAUTION

Use only the stylus provided to push the reset switch.

Do not push the reset switch with any other sharp-pointed objects, i.e. pencils, and ball point pens. The reset switch or other parts may become damaged.

(2)Tap the screen to set up your Pocket PC.

The Windows*1 alignment screen is displayed.

*1 This computer uses Microsoft® Windows® MobileTM 2003 software for Pocket PC.

(3)Align the touchscreen.

(For alignment, tapping operations are required. For information on tapping, refer to page 20.)

"+" is displayed in the center, upper left, lower left, lower right, and upper right portions of the screen, in that order. Each time the "+" mark is displayed, tap the center of the "+" mark with the stylus.

(4)At [complete], tap the screen to begin using CF-P1.

4 Set the time and date

(1)Tap - [Settings] - [System] tab - [Clock].

(2)Set the time and date.

(3)Tap [ok].

NOTE

You can also set the time and date by tapping on [Today] screen.

This concludes the first-time use operation guidelines.

15