455E.book Page 34 Thursday, March 20, 2003 7:44 PM
Handset Settings
Before programming, please follow steps 1 to 3.
1 | 2 | 3 |
Press MENU. | Search/Select | Search/Select |
"Setting Handset". "Display Option".
Selecting the Talk Mode Display
Even if you select “Phone No”, the length of the call will appear on your display when you receive calls.
4 | 5 |
Search/Select Search/Select
"Talk Display". "Talk Time"(Length of the call) or "Phone No."(Phone number).
Selecting the Display Language
4 | 5 |
Search/Select | Search/Select |
"Select Language". | desired language.*1 |
•To exit the operation, press any time.
*1 You can select one of 24 languages. If you set a language you cannot read, reset the handset to its initial settings. Press MENU DOWN DOWN RIGHT UP
RIGHT 4-digit Handset PIN UP OK
All handset setting will be reset to their initial settings (p.39), however, the Phonebook data will be saved.
Call Option
Call Bar On/Off
This allows you to make emergency and internal calls.
1 | 2 | 3 |
Press MENU. | Search/Select | Search/Select |
| "Setting Handset". "Call Option". | |
4 | 5 | |
Search/Select |
| Search/Select |
"Call Bar". |
| "ON" or "OFF".*2 |
•To exit the operation, press any time.
*1 The factory preset is 0000.
*2 If “ON” is selected, is displayed.
34