Panasonic KX-TCD455E operating instructions Intercom between Handsets

455E.book Page 45 Thursday, March 20, 2003 7:44 PM

Intercom

Intercom between Handsets

You can use your handsets as a 2-way intercom.

For example, when Handset 1 calls Handset 2:

	<Handset 1>
1	INT	( on the display) 2	2
	Press INTERCOM.		Press desired the
			Handset Number.

<Handset 2> 3

Press TALK.*1

•To hang up, press .

•Intercom calls can be conducted within the radio cell of the current base unit, but not with units in neighbouring radio cells.

Transferring a Call to Another Handset/Conference Call

Intercom can be used during a call to transfer an external call between handsets that are registered to the same base unit. For example, when handset 1 transfers a call to Handset 2:

<Handset 1>	1		(	on the display) 2	2	4 3*3
(During a call)		INT
		Press INTERCOM.			Press the desired
					Handset Number.*2
				<Handset 2>		3
						Press TALK.*1

•To hang up, press .

*1 You can also press a dialling button, INTERCOM, t, x or SPEAKERPHONE.

*2 If you press after pressing the desired handset number, a call can be transferred to another handset without speaking to another handset.

If the transferred call is not answered within 30 seconds, Handset 1 will ring again.

*3 When Handset 2 answers a call transferred, press to complete a call transfer or press dialling button 3 to establish a conference call.

Cordless Telephone

Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333 45