Panasonic KX-TCD455E operating instructions Set the Walkie-Talkie Mode

Page 46

455E(02).fm Page 46 Friday, April 18, 2003 5:35 PM

Walkie-Talkie

The Walkie-Talkie feature allows handsets to communicate with each other outside the range of the base unit. When the handsets are in Walkie-Talkie mode, external calls cannot be received. Only KX-A145E with Walkie-Talkie feature can communicate with one another. Talk time in this mode is approximately 6 hours.

Range:

The maximum range between two handsets whilst in Walkie-Talkie mode is up to 50 metres indoors and 300 metres outdoors.

Set the Walkie-Talkie Mode

You can set the Walkie-Talkie mode. There are two types. Common Base Station mode and Group mode. The factory preset is Group mode.

-In Common Base Station mode, communication is possible between handsets registered to a common base unit. If the handsets are registered to more than one base unit, the same base unit must be selected.

Please note, the feature will not operate if AUTO is set in the base unit selection.

If Common mode is selected and the handset is not registered to a base unit, an error tone sounds.

-In Group mode, communication is possible between handsets that are both set to this mode and whose Group ID’s are common.

This allows the handsets not to be dependent upon the base unit to which they are registered and can operate outside of the base unit range.

1

2

 

3

4

Press

Search/Select

Search/Select

Search/Select

MENU.

"Setting Handset". "Other Option". "W/T Setting".

5

 

6 “Common” :

 

 

Search/Select

 

Press

 

 

 

 

"Common" or

 

RIGHT.

 

"Group".

“Group” : Group Code*1

Handset

 

 

Number*2

 

 

 

Press

 

 

 

Press

 

 

 

RIGHT.

RIGHT.

7

Search/Select "Save".

To exit the operation, press any time.

*1 This can be 3 numbers of your choice. The default is 000. Make note of your code. *2 The default is 1.

IMPORTANT: Each handset should have its own unique number.

46

Image 46
Contents Contents Operating InstructionsBefore Initial Use Accessories included08700 100 076 Monday Friday 900am 530pm Environment Battery CautionImportant Information LocationBattery Installation Setting upConnection Fully charged Battery ChargeBattery Life Display iconReplacing the Batteries Symbols Used in This Operating InstructionsSelecting the Battery Type Please use only Panasonic P03PNi-MH or P03HNi-Cd batteriesHandset Location of ControlsHandset Display Base unitSetting the Clock/Date Using the TelephonePower On/Off Making a CallAuto Talk Receiver Volume/Speaker VolumeAnswering a Call Temporary Bell OffTurning the Mic On/Off Handset Locator/PagingSpeakerphone Phone NumberEditing the Dialled Number in the Redial List Making CallsRedialling Clearing One/All Dialled Items in the Redial ListCaller ID Caller ID ServiceCaller ID Display Calling Back Caller ID ListEditing a Received Number in the Caller List Storing a Caller Information Private Category FeaturePhonebook NameTo change the Character Mode To enter Names/Characters in the phonebookFinding Items in the Phonebook To Search for a Name by Initial For example FelixPhonebook Character Table Clearing Caller Information Editing Caller InformationNumber Dialling with the PhonebookPre-dialling Phone Number *1 Dialling with a Hot Key Hot KeyRegistering a Phone Number as a Hot Key Clearing Hot Key RegistrationPhonebook Copy To Copy an item/All items in the PhonebookTo Send a Text Message from Fixed Line to Mobile SMS Feature Text MessagingTo Send a Text Message from Fixed Line to Fixed Line To Send a Text Message from Mobile to Fixed LineWriting and Sending New Messages Phone Number *2Selecting the Input Mode Text EntryEntering Text in LetterWise Mode Reading/Displaying a Message in the Outgoing ListSending/Editing/Clearing a Message from/in the Outgoing List Receiving a Text MessageDisplaying/Reading a Message in the Incoming List SMS Messages Receive List .*2Clear/Reply/Edit Incoming Messages Before programming, please follow steps 1 toStoring the Sender’s Phone Number in the Phonebook Message Centre Number Changing the SMS Service Centre NumberDigit Base Unit PIN *1 DigitSMS Character Table SMS Character TableLetterWise Character Table Buttons Setting Alarm Time Handset SettingsTime Alarm Setting Time Alarm On/OffRinger Option Setting the Ringer VolumeSelecting the Ringer Pattern for Private Ring Tone Option Selecting the Standby Mode DisplayDisplay Option Call Option Other Options Setting the Direct Call NumberSetting the Direct Call On/Off Current 4-digit Handset PINDialling Pause for PBX line/long distance service users Recall FeatureKey Lock Base Unit Settings 4-digit Base Unit PIN*1 5 Handset Number4 Base Unit 5 2 PIN *1 Cancelling Call Restricted Number 4-digit Base Unit PIN*1Time Break/Earth Recall Pause TimingHandset Initial Settings Function Initial SettingsReset Handset Digit Handset PIN*1Base Unit Initial Settings Function Reset Base Unit SettingsDigit Base Unit PIN*1 Multi-unit User Operation Handset Registration to a Base UnitCancelling a Handset Cancelling a Base UnitDigit Handset Number Setting the Selected Handsets Mode Handset Numbers*2 Ringer Mode Selection Setting the All Handsets ModeSetting the Selected then All Handsets Mode Base Unit Selection Radio CellIntercom between Handsets IntercomTransferring a Call to Another Handset/Conference Call Set the Walkie-Talkie Mode Walkie-TalkieTo turn the Walkie-Talkie Mode ON/OFF Talking in Walkie-Talkie ModeOptional Headset Using the Belt ClipConnecting the optional Headset Jack headset to the handset Wall MountingProblem Possible cause Solution Before Requesting Help455E.book Page 50 Thursday, March 20, 2003 744 PM SMS-Text Messaging Problem Possible cause Solution Error Code DescriptionSpecifications Technical InformationIndex PINGuarantee Panasonic Business Systems U.K455E.book Page 55 Thursday, March 20, 2003 744 PM Sales Department Panasonic Business Systems U.K For your future referencePQQX13447ZA D0303-0