Panasonic KX-TCD400NZ operating instructions Setting up, Connection, Battery Installation

Page 4

Setting up

Connection

Do not connect the telephone line cord to the phone socket 4 until the handset is fully charged.

Plug in the AC adaptor and the telephone line cord in order 1, 2, 3.

	1
Hook	2	4
		4

Fasten the AC adaptor cord to prevent it from being disconnected.

The AC adaptor must remain connected at all times (It is normal for the adaptor to feel warm during use).

•Never install telephone wiring during a lightning storm.

Battery Installation

Please ensure the batteries are inserted as shown. part should be inserted first. Close the cover as indicated by the arrow.

•When you replace the batteries, part should be removed first.

To replace the battery:

Press the notch on the cover firmly and slide it as indicated by the arrow. Replace 2 batteries and close the cover then charge the handset for about 7 hours.

Image 4

Contents Contents Model No. KX-TCD400NZAccessories included Before Initial UseBattery Caution Safety CautionImportant Information EnvironmentBattery Installation Setting upConnection Battery Charge Battery LifeFully charged Display iconSymbols Used in This Operating Instructions Selecting the Battery TypeReplacing the Batteries Please use only Panasonic P03PNi-MH or P03HNi-Cd batteriesHandset Display Location of ControlsHandset Wall Mounting Using the Telephone Power On/OffSetting the Clock/Date Making a CallRedialling Making CallsEditing the Dialled Number in the Redial List Receiver Volume Answering CallsAuto Talk Temporary Bell OffPhonebook Storing a Callers InformationEditing a Caller Information NumberClearing a Caller Information Dialling with the PhonebookStoring the Number from the Redial List into the Phonebook Phone Number *1 NameHot Key Registering a Phone Number as a Hot KeyDialling with Hot Key Clearing the Hot Key RegistrationHandset Settings Time AlarmSetting Time Alarm On/Off Before programming, please follow steps 1 toSetting the Ringer Pattern for External Call/Alarm Setting the Ringer VolumeRinger Option Tone Option Display Option Call OptionSetting the Direct Call On/Off Setting the Direct Call NumberOther Options Dialling Pause for PBX line/long distance service users Recall FeatureKey Lock Base Unit Settings Base Unit PIN *1Pause Timing Digit Base Unit PIN *1 5Reset Handset Initial SettingsHandset Initial Settings Function Base Unit Initial Settings Function Reset Base Unit SettingsDigit Base Unit PIN*1 Problem Possible cause Solution Before Requesting HelpTechnical Information SpecificationsConnections Index PINPage Page Page For your future reference PQQX13638YA D0303NR1043