Panasonic KX-TCD400NZ Symbols Used in This Operating Instructions, Replacing the Batteries

Page 6

Setting up

Symbols Used in This Operating Instructions

Symbol	Meaning

To search the desired item, press UP or DOWN.

To select the desired item, press RIGHT.

To search and then to select the desired item, press UP or DOWN then

RIGHT.

To move the cursor to the right or to the left, press RIGHT or LEFT.

To go to the next step.

"" The words in " " indicate the words in display.

Replacing the Batteries

If the icon flashes after a few telephone calls even when the handset batteries have been fully charged, 2 batteries must be replaced.

Charge new batteries for approximately 7 hours before initial use.

(The telephone line cord must not be connected to the telephone socket at this time.)

When replacing the batteries, ensure that the correct battery type is selected.

Selecting the Battery Type

1 2 3 4

Press MENU. Search/Select	Search/Select	Search/Select
"SETTING HS".	"OTHER OPT".	"BATTERY TYPE".

5

Search/Select "NI-CD"or "NI-MH".

•To exit the operation, press any time.

•When Ni-Cd batteries are fitted with the "BATTERY TYPE" setting in "NI-MH", icon will disappear and stop charging even if the handset is on the cradle.

•Do not use non-rechargeable batteries. If non-rechargeable batteries are fitted and start charging, it may cause the leakage of the battery electrolyte.

Please use only Panasonic P03P(Ni-MH) or P03H(Ni-Cd) batteries.

6

Image 6

Contents Contents Model No. KX-TCD400NZAccessories included Before Initial UseImportant Information Battery CautionSafety Caution EnvironmentSetting up Battery InstallationConnection Fully charged Battery ChargeBattery Life Display iconReplacing the Batteries Symbols Used in This Operating InstructionsSelecting the Battery Type Please use only Panasonic P03PNi-MH or P03HNi-Cd batteriesLocation of Controls Handset DisplayHandset Wall Mounting Setting the Clock/Date Using the TelephonePower On/Off Making a CallMaking Calls RediallingEditing the Dialled Number in the Redial List Auto Talk Receiver VolumeAnswering Calls Temporary Bell OffPhonebook Storing a Callers InformationClearing a Caller Information Editing a Caller InformationNumber Dialling with the PhonebookStoring the Number from the Redial List into the Phonebook Phone Number *1 NameDialling with Hot Key Hot KeyRegistering a Phone Number as a Hot Key Clearing the Hot Key RegistrationSetting Time Alarm On/Off Handset SettingsTime Alarm Before programming, please follow steps 1 toSetting the Ringer Volume Setting the Ringer Pattern for External Call/AlarmRinger Option Tone Option Display Option Call OptionSetting the Direct Call Number Setting the Direct Call On/OffOther Options Recall Feature Dialling Pause for PBX line/long distance service usersKey Lock Base Unit Settings Base Unit PIN *1Pause Timing Digit Base Unit PIN *1 5Initial Settings Reset HandsetHandset Initial Settings Function Reset Base Unit Settings Base Unit Initial Settings FunctionDigit Base Unit PIN*1 Problem Possible cause Solution Before Requesting HelpSpecifications Technical InformationConnections Index PINPage Page Page For your future reference PQQX13638YA D0303NR1043