Operation
System Speed Dialing
To dial
System Speed Dial No. (3 digits) 
Doorphone Call
Doorphone No. (2 digits) 
Automatic Callback Busy
To setTo cancel
While hearing a busy tone
To answer from an idle extension | To answer from an idle outside line |
While hearing a callback ring | While hearing a callback ring |
Outside Phone No. 
*1 To assign a phone number to a Hot Key, see page 41.
*2 When a call is made using the PBX System Phonebook, the called party’s name is not stored in the Outgoing Call Log. To log the name as well as the number, copy the item into the Handset Phonebook before dialing it. (See page 39.)
*3 To store an item in the Phonebook, see page 35.
To search for an item stored in the Phonebook, see page 24.
*4 This step can be omitted.
•To enter characters, see page 42.
•You can confirm that the number was dialed correctly before calling (Predialing) by entering the number, then pressing 
.
•To clear an entire number while predialing, press 
for more than 1 second.
•If an outside call is received from a phone number stored in the Handset Phonebook, the number and name of the caller will be displayed in the call log.
•To cancel dialing, press 
.
•If “ 
” flashes, move closer to the CS and dial again.
•For more information, refer to the user documentation for your PBX.
Document Version | 23 |