Making/Answering Calls
Making calls
1Lift the handset and dial the phone number.
LTo correct a digit, press {C/T}, then enter the correct number.
2Press {C}.
3When finished talking, press {ih} or place the handset on the base unit.
Speakerphone
The handset features a digital speakerphone, which allows you to have
1During a conversation, press {s} to turn on the speakerphone.
LSpeak alternately with the caller.
2When finished talking, press {ih} or place the handset on the base unit.
Note:
LFor best performance, please note the following:
–Use the speakerphone in a quiet environment.
–If you or the other party have difficulty hearing each other, press {e} or {v} repeatedly to adjust the speaker volume as necessary.
LTo switch back to the receiver, press {C}.
To adjust the receiver or speaker volume
Press {e} or {v} while talking. 4 volume levels are available for the receiver. 6 levels are available for the speaker.
Redial feature
Previously dialled phone numbers (each 24 digits max.) can be redialled.
To redial the last number dialled
Press q(right soft key), then press {C} or {s}.
LIf {s} is pressed, the unit will redial automatically if the other party’s line is engaged.
Note:
LYou can also press {C} or {s} before pressing q.
To make a call using the redial list
The last 10 phone numbers dialled are stored in the redial list.
1Press q (right soft key).
LThe last number dialled will be displayed.
2Press {e} or {v} repeatedly to select the desired number.
LTo exit the list, press {ih}.
3Press {C} or {s}.
LIf {s} is pressed, the unit will redial automatically if the other party’s line is engaged.
To redial automatically
If you press {s} when redialling and the other party’s line is engaged, the unit will redial the phone number again automatically. The unit will redial up to 9 times. While the handset is waiting to redial, {s} will flash. While the handset is redialling, mute is automatically turned on.
Note:
LAutomatic redial is cancelled when any button (except q) is pressed.
LIf mute does not turn off after the line is connected, press {C/T}.
To edit a number in the redial list before calling it
1Press q (right soft key).
2Press {e} or {v} repeatedly to select the desired number, then press $.
13