Panasonic KX-TG1850NZ operating instructions Setting the date and time, Example 330 PM

Page 12

Preparation

Setting the date and time

Important:

LConfirm that the AC adaptor is connected.

LEnsure that w is not flashing. If the handset is in screen saver mode, w is not displayed. Press {ih} to turn the display on.

1Press $(middle soft key).

2Select b, then press ,.

3Select “Set Date & Time”, then press

4Enter the current day, month and year by selecting 2 digits for each.

Example: 17 May, 2005 Press {1}{7} {0}{5} {0}{5}.

5Enter the current hour and minute by selecting 2 digits for each.

LYou can select “AM”, “PM” or 24-hour time entry by pressing {*} repeatedly.

Example: 3:30 PM

Press {0}{3} {3}{0}, then press {*} repeatedly until “03:30 PM” is displayed.

6Press ,.

7Press {ih}.

Note:

LTo correct a digit, press {<} or {>} to move the cursor, then make the correction.

LThe date and time may be incorrect after a power failure. In this case, set the date and time again.

Image 12

Contents Model No. KX-TG1850NZ Introduction Feature highlights Making/Answering Calls Accessory information Included accessoriesAdditional/replacement accessories Battery caution Important informationGeneral EnvironmentControls and displays ControlsDisplays Menu Menu/feature Icon Menu iconsSoft key icons Action Key Icon Connections Soft Action Key IconBattery installation Battery chargeBattery strength Battery icon Screen saver mode Battery replacementTurning the power on/off Setting the date and time Example 330 PMRedial feature Making callsOther features Voice enhancerTo erase numbers in the redial list MuteAnswering calls Using the phonebook Adding entries to the phonebookCategories Finding and calling a phonebook entryEditing entries in the phonebook Erasing entries from the phonebookOne touch dial Making a call using a one touch dial key Chain dialCopying one entry Copying all entriesGuide to handset settings Handset settings Sub-menu Default setting MenuTime settings Ringer setupAlarm Ringer volumeNight mode Setting the start and end time for night modeTurning night mode on/off Setting the ring delay for night modeDisplay setup Selecting the standby mode displaySelecting categories to bypass night mode Selecting wallpaperCall options Other optionsResetting the handset to its default settings Turning keytones on/offGuide to base unit settings Base unit Sub-menu Default setting Settings menuNight mode Setting pause length Changing the recall timeStoring/changing emergency numbers Selecting area codes to be deleted automaticallySetting call restriction Codes which you want the unit to delete automaticallyResetting the base unit to its default settings Using Caller ID service Category features for Caller ID subscribersCaller list Viewing the caller list and calling backEditing a caller’s phone number before calling back Erasing caller informationCall minder Storing caller information into the phonebookOperating additional units Registering a handset to a base unitAdditional handsets Additional base unitsCancelling a handset Cancelling a base unitSelecting a base unit Turning the repeater mode on/off Increasing the range of the base unitHandset Multi-unit Operation Wall mounting 60 mm ScrewsAvailable character entries Character entry modesExtended 1 character table N Extended 2 character table OCyrillic character table P Troubleshooting Initial settingsProblem Cause & solution Telephone Redial the number manually Specifications Index PINPage Page Page Customer Support Centre Tel. No 272 Sales Department Copyright