Janome 10001 manual Ordinary Sewing Mode Setting, Auto Tension, Remaining Bobbin Thread, Feed Dog

1	Auto Tension
		Auto
2	Remaining Bobbin Thread
		2
3		Feed Dog
4	Free Arm Length
					5
			Register	E	7
	Common	Ordinary	Embroidery
	Set	Sewing
			6

Ordinary Sewing Mode Setting

In this mode you can set the following sewing functions:

1 Auto Tension

The Auto Thread Tension level can be adjusted.

Tension level can be set from – 5 to + 5. Changes are made in increments of 1 and the default setting is 0 (Auto).

Press the key, to set the tension level higher.

Press the key, to set the tension level lower.

2 Remaining Bobbin Thread

The Visual Touch Screen will display “Bobbin Thread almost out” when the bobbin thread is running low. The Thread Sensor detects the remaining amount of thread in the bobbin.

It has 5 adjustable steps, 0 to 4.

Press key to increase thread amount level for the warning message to be displayed.

Press key to decrease thread amount level for the warning message to be displayed.

NOTE:

•This is an approximate guide to setting the bobbin thread sensor.

3 Feed Dog

You can drop or raise feed dog by pressing the

key or the key.

4 Free Arm Length

The carriage will move allowing you to use the full length of the Free Arm, when you press key.

Press key to return the carriage to its home position.

5 Page Key

You can turn the pages by pressing the Page keys.

6 Register key

Press this key to register the settings and return to the previous screen.

7 Return key

Press this key to return to the previous screen without registering the settings.

28