Janome 10001 manual Cleaning the Hook Race and Feed Dog, 173, Assemble the hook race

1

1

2

3

3

4

5

5

6

12

8

8

2

4

3

4

6

7

7

10

9

11

Cleaning the Hook Race and Feed Dog

Press the Up/Down Needle Button to raise the needle, then unplug the sewing machine.

NOTE:

•Do not dismantle the machine other than what is explained on this page.

1.Remove the Set Screw on the left hand side of the needle plate with the screwdriver supplied with the machine. Remove the Needle Plate.

2.Take out the bobbin. Lift up the Bobbin Holder and remove it.

3.Clean the Bobbin Holder with a Lint Brush.

4.Clean the Feed Dog and Hook Race with the Lint Brush.

5.Clean the Hook Race with a Soft Dry Cloth.

(You may also use a vacuum cleaner.) 1 Set Screw

2 Needle Plate

3 Bobbin Holder

4 Lint Brush

5 Feed Dog

6 Hook Race

7 Soft Dry Cloth

Assemble the hook race

6.Insert the Bobbin Holder so that the Knob fits next to the Stopper in the hook race.

7.Insert the bobbin.

8.Reattach the needle plate, aligning the Guide Holes on the needle plate with the Needle Plate Guide Pins and tighten the screw.

8Bobbin Holder

9Knob

10Stopper

11Guide Holes

12Needle Plate Guide Pins

NOTE:

•After cleaning the machine, make sure the needle and presser foot are attached.

173