Janome 10001 manual 152, Cancel key, Selecting the hoop size

							3
			B:140x200mm
			Size	Copy
				A	BC
			Color
			OK	Cancel			2
A	Z			Edit
2		3		B:140x200mm
			A(F)		B		C
4
	A(F):126x110mm
	Size	Copy
		A	BC
	Color
					C:50x50mm
	5				Size	Copy
						A	BC
					Color
							152

Cancel key

When you press the key, any changes that have been made to the selected pattern will be cancelled.

2 Cancel Key

NOTE:

•When there is more than one pattern on the Edit screen, any changes to the pattern cannot be cancelled after another pattern has been selected.

Selecting the hoop size

In the Edit window, you need to select the appropriate size of the embroidery hoop by

pressing the key.

There are three hoop size selections:

*Standard Hoop A, 12.6 cm (5˝) by 11cm (4 3/8˝)

*Big Hoop B, 20 cm (8˝) by 14 cm (5 1/2˝)

*Free-arm Hoop C, 5 cm (2˝) by 5 cm (2˝) 3 Hoop Selection Key

NOTES:

•It is always necessary to select the correct hoop size after you open the Edit Screen.

•Free-arm Hoop C is sold separately.

•Whenever the Edit screen opens, Big Hoop B is the initial hoop setting.

4The layout boundary for Standard Hoop A

• The red frame indicates the edit boundary. When you layout the patterns, make sure the patterns will fit inside the red frame.

5The layout boundary for Free Arm Hoop C

•The red frame indicates the edit boundary. When you layout the patterns, make sure the patterns will fit inside the red frame.

CAUTION:

•Make sure to use the specified hoop, otherwise the needle will hit the embroidery hoop.

•When the correct embroidery hoop is not chosen, the design exceeds the edit boundary and you cannot embroider the design.

•For big patterns, choose the Big Hoop B.