Janome 10001 manual Straight Stitch, Decorative Stitches

Straight Stitch				Auto
					A
				1/14
58	59	60	61		62
2	3	6	2	3
63	64	65	66		67
6
68	69	70
				Adjust		2
			A	Z
				1
	1
	2
	Adjust
3.5	2.50	4.2	Default			6
			Cancel			7
				OK		8
3	4	5
						79

Decorative Stitches

In the Decorative Stitch Mode, some utility stitches, such as straight stitches, zigzag stitch, overedge stitch are included as programmable patterns.

The number beside the pattern image on the straight stitch key denotes stitch counts of a programmable unit.

Press key to select the Decorative Stitch Mode.

Function Keys

1Needle Up/Down Key: Press key to bring the needle bar up or down when

stopping the machine.

2 Adjust Key: Press Adjust key to open the Setting window.

3Zigzag Width: Press the Zigzag Width

or keys to change the stitch widths.

4Stitch Length: Press the Stitch Length

or keys to increase/decrease the stitch length.

5Thread Tension: Press the Thread Tension

or keys to increase/decrease the thread tension.

6Default key: When you press Default key, all settings in the adjusting window will return to default (the same settings as when you purchased the machine).

7Cancel key: When you press Cancel key, the adjusting window will close and the setting remains.

8 OK key: Press OK key. The setting is registered and the screen returns to the previous window.

NOTE:

•Refer to page 75 for operation of other function keys.