Janome 10001 manual Remove the Cloth Guide, Overcasting with the Cloth Guide

Cloth Guide position

15 mm

OK Cancel Default

6 5 4

Remove the Cloth Guide.

OK Cancel

Cloth Guide Position window will appear.

Press the or the key to move the Cloth Guide to the desired position.

NOTES:

•The distance of the Cloth Guide edge from the center needle position is shown in millimeter or inch.

•You may set the Cloth Guide Position from –2 mm to 40 mm (–1/8˝ to 1 1/2˝).

•From -2 mm to10 mm, you may change the setting by 1 mm and from 10 mm to 40 mm,

you may change the setting by 5 mm each

time you press the or the key.

4Default key: When you press the Default key the setting returns to the default (the same

settings as when you purchased the machine, which is 15 mm,

5Cancel key: When you press Cancel key, the Cloth Guide Position window will close and the setting remains unchanged.

6 OK key: When you press the OK key, your settings are registered.

Overcasting with the Cloth Guide

Select Pattern 10 and use Overedge Foot C. Set the Cloth Guide position at 2 mm (1/16˝) and sew.

NOTE:

• When using the Cloth Guide, if you select other patterns, the Visual Touch Screen shows “Remove the Cloth Guide”. Press the OK key so that the carriage returns to its home position. Then you can safely remove the Cloth Guide.

47