Janome 10001 manual Formatting the memory bank

8		inch/mm	inch mm
9	Resume Mode			On
				Off
10	Key PositionAdjustment			Yes
11	Format			Yes
	Built-in
12	ATAPC Card			Yes
13	ResetAll to Defalts			Yes
			Register
	Common	Ordinary	Embroidery
	Set	Sewing
	(A)

Key Position Adjustment

PRESS MARK(+).

(B)

Key Position Adjustment

END

8 Inch / Millimeter

You can set your machine’s measuring unit to either “inch” or “millimeter” depending upon your preference. The default measuring unit setting is “millimeter”.

Press inch or mm key to select the unit you preferred.

NOTE:

•Stitch length and width are displayed in millimeter regardless the inch/mm setting.

9 Resume Mode

The Resume Mode allows you to return to either Ordinary Sewing Mode or Embroidery Mode, which was selected when you turned the machine off.

To activate the Resume Mode, press OnOff key to checkthe box on.

10 Key Position Adjustment

If you think the touch panel keys are out of align- ment, you can correct it in the Key Position Adjust- ment window.

When you press the Yes Key, window (A) will be shown. With your finger, press the Black + Sign as it appears in order. When you press the last black + sign, the window (B) will be shown.

The window will close and go back to the original screen with the new setting being registered.

Formatting the memory bank

If the internal memory or ATA PC card does not function due to damage to the memory bank, you need to re-enable it by formatting the memory.

11 Formatting the Built-in memory

To format the internal memory, press the Yes key next to Built-in memory.

12 Formatting the ATA card

To format the ATA PC card or Compact Flash, press the Yes key next to ATA PC card.

13 Reset All to Default

Pressing the Yes key will reset all the parameters to their original settings (the same settings as when you purchased the machine).

27