TG593xAL.book Page 35 Tuesday, April 11, 2006 10:31 AM
|
| Programming | |
|
|
|
|
Feature | Feature | Setting code | System |
| code |
| setting |
Ringer tone (Base unit) | {0}{*}{1} | – | |
Ringer tone (Handset) | {1}{2} | – | |
|
|
| |
Ringer volume (Handset) | {1}{1} | {1}: Low {2}: Medium | – |
|
| {3}: <High> {0}: Off |
|
Set area code | {0}{4} | (page 30) | – |
Set dial mode | {0}{5}{1} | (page 51) | r |
Set line mode*4 | {0}{5}{3} | {1}: A {2}: <B> | r |
Set recall time*5 | {0}{5}{2} | {1}: 700ms {2}: 600ms | r |
|
| {3}: 400ms {4}: 300ms |
|
|
| {5}: 250ms {6}: 110ms |
|
|
| {7}: <100ms> {8}: 90ms |
|
Time adjustment*6 | {0}{9} | {1}: <Caller ID[auto]> | r |
(Caller ID subscribers only) |
| {0}: Manual |
|
Voice enhancer | {5} | {1}: On {0}: <Off> | – |
*1 If you subscribe to Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*2
*3 You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones.
*4 Generally, the line mode setting should not be adjusted. If “Line in use” is not displayed when another phone connected to the same line is in use, you need to change the line mode to “A”.
*5 The recall time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary.
You can access your service provider/telephone company “Call Waiting” service by having the recall time set at 100 ms, and then follow your service provider/telephone company “Call Waiting” instructions to operate this service.
*6 This feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first.
35