| Useful Information |
Battery recharge |
|
|
|
Problem | Cause/solution |
I fully charged the battery, | LClean the charge contacts and charge again |
but 7continues to flash, | (page 10). |
or 8 is displayed. | LThe battery may need to be replaced with a new |
| one (page 10). |
|
|
The handset display is | LConfirm that the battery is properly installed. |
blank. | LFully charge the battery (page 10). |
|
|
While charging, the charge | LThe battery is empty. The charge indicator does |
indicator does not light and | not light in order to concentrate on charging. |
“Charge for 7h” is | After about 5 minutes, the charge indicator lights |
displayed. | and “Charging” is displayed. |
|
|
Making/answering calls, intercom | |
|
|
Problem | Cause/solution |
Static is heard, sound cuts | LMove the handset and base unit away from |
in and out. Interference | other electrical appliances. |
from other electrical units. | LMove closer to the base unit. |
| LTurn on the clarity booster feature (page 17). |
| LYour unit is connected to a telephone line with |
| ADSL (JetStream) service. We recommend that |
| you contact your ADSL service provider to have |
| an ADSL Splitter installed. We do not |
| recommend the use of generic ADSL filters. |
| Contact your ADSL provider for details. |
|
|
The handset does not ring. | LThe ringer volume is turned off. Adjust it (page |
| 25). |
|
|
I cannot make a call. | LAnother handset is in use. Try again later.*1 |
| LIf the above remedy does not solve the problem, |
| set the dialling mode. Press {MENU} {0} {5} |
| {1} {Save} {OFF}. |
| LThe unit is not designed to be used with rotary |
| (pulse dialling) services. |
|
|
I cannot have a | LMake sure that an optional headset is |
conversation using the | connected properly (page 32). |
headset. | LIf |
| press {C} to switch to the headset. |
|
|
I cannot page the handset. | LThe called handset is too far from the base unit. |
| LThe called handset is in use. Try again later. |
|
|
*1 |
|
35