Panasonic KX-TG9333T, KX-TG9331, KX-TG9343, KX-TG9334, KX-TG9344, KX-TG9332, KX-TG9341 Specifications

Page 55

Useful Information

Specifications

■Standard:

DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0)

■Number of channels:

60 Duplex Channels

■Frequency range:

1.92 GHz to 1.93 GHz

■Duplex procedure:

TDMA (Time Division Multiple Access)

■Channel spacing:

1,728 kHz

■Bit rate:

1,152 kbit/s

■Modulation:

GFSK (Gaussian Frequency Shift Keying)

■RF transmission power:

115 mW (max.)

■Voice coding: ADPCM 32 kbit/s

■Power source:

120 V AC, 60 Hz

■Power consumption: Base unit:

Standby: Approx. 0.9 W

Maximum: Approx. 3.4 W

Charger*3:

Standby: Approx. 0.3 W

Maximum: Approx. 2.9 W

■Operating conditions:

5 °C – 40 °C (41 °F – 104 °F), 20 % – 80 % relative air humidity (dry)

■Dimensions:

Base unit*1: Approx. 63 mm ⋅ 140 mm ⋅ 119 mm

(2 15/32 inches ⋅ 5 1/2 inches ⋅ 4 11/16 inches)

Base unit*2: Approx. 70 mm ⋅ 150 mm ⋅ 136 mm

(2 3/4 inches ⋅ 5 29/32 inches ⋅ 5 11/32 inches)

Handset: Approx. 156 mm ⋅ 49 mm ⋅ 32 mm

(6 1/8 inches ⋅ 1 15/16 inches ⋅ 1 1/4 inches)

Charger*3: Approx. 51 mm ⋅ 75 mm ⋅

88 mm

(2 inches ⋅ 2 15/16 inches ⋅ 3 15/32 inches)

■Mass (weight):

Base unit*1: Approx. 220 g (0.49 lb.)

Base unit*2: Approx. 290 g (0.64 lb.)

Handset: Approx. 130 g (0.29 lb.)

Charger*3: Approx. 60 g (0.13 lb.)

*1 KX-TG9331/KX-TG9332/ KX-TG9333/KX-TG9334

*2 KX-TG9341/KX-TG9342/ KX-TG9343/KX-TG9344

*3 KX-TG9332/KX-TG9333/ KX-TG9334/KX-TG9342/ KX-TG9343/KX-TG9344

Note:

L Design and specifications are subject to change without notice.

L The illustrations in these instructions may vary slightly from the actual product.

For assistance, please visit http://www.panasonic.com/help

55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents Operating Instructions Preparation Caller ID ServiceVoice Mail Service IntroductionModel No Base unit Handset Product informationNotable differences between the models KX-TG9331 seriesFeature highlights Supplied accessories Accessory informationKX-TG KX-TGA630 Additional/replacement accessoriesExpanding your phone system Sales and support informationFor your safety Base unit location/avoiding noise Important safety instructionsBattery For best performanceRoutine care EnvironmentBase unit ControlsHandset DisplayCharger ConnectionsIf you subscribe to a DSL/ADSL service Battery installation and replacementBattery level Battery icon Battery chargeOperation Operating time Display language Symbols used in these operating instructionsSetting up the unit before use Dialing modeTo attach the belt clip To remove the belt clip Belt clipHeadset optional Date and timeSP-PHONE Using the base unitErase iYes iOFF Pause for PBX/long distance service users IPAUSEAdjusting the base unit ringer volume Using the handsetAnswering calls Flash Useful features during a callHold MuteCall Wait Temporary tone dialing for rotary/pulse service usersHandset clarity booster Call shareAdding entries Shared phonebookFinding and calling a phonebook entry Next Editing entriesErasing entries Chain dialMain menu Sub-menu Programmable settingsProgramming by scrolling through the display menus MenuInitial setting Feature Setting code System Code Programming using the direct commandsRing count Programming Night mode Special instructions for programmable settingsBlock calls Caller ID subscribers only Setting the start and end time AlarmTurning night mode on/off Registering a handset to a base unit Registering a unitCustomer support Operating additional handsetsMissed calls Using Caller ID serviceCaller ID features Talking Caller IDViewing the caller list and calling back Caller ID number auto edit featureCaller list Ringer IDView CID All erase iYes Erasing selected caller informationErasing all caller information Storing caller information into the phonebookMemory capacity Turning off the call screening featureAnswering system Turning the answering system on/offGreeting message Listening to messages using the base unitCalling back Caller ID subscribers only Listening to messages using the handsetErasing all messages Voice guidanceRemote operation Remote access codeUsing the answering system remotely Voice memoSkipping the greeting message to leave a message Answering system settingsRemote commands Turning on the answering system remotelyMessage alert Caller’s recording timeTurning VM tone detection on/off The default setting is On Voice mail serviceStoring the voice mail VM access number To erase the voice mail access numberNew Voice Mail is displayed on the handset Listening to voice mail messagesAnswering an intercom call IntercomTransferring calls, conference calls Making an intercom callHandset locator Wall mounting To remove the wall mounting adaptor Display message Cause/solution Error messagesGeneral use Problem Cause/solution TroubleshootingProgrammable settings Problem Cause/solution Battery recharge Problem Cause/solution Problem Cause/solutionMaking/answering calls, intercom Caller ID/Talking Caller ID Problem Cause/solution Answering system Problem Cause/solution Liquid damage Problem Cause/solution FCC and other information Useful Information Energy Star FCC RF Exposure WarningSpecifications Or, contact us via the web at Customer servicesTTY users hearing or speech impaired users can call Panasonic Corporation WarrantyNorth America Limited Warranty Limits And Exclusions Index Copyright When you ship the productFor your future reference Panasonic Puerto Rico, Inc
Related manuals
Manual 60 pages 62.21 Kb

KX-TG9334, KX-TG9342, KX-TG9344, KX-TG9333T, KX-TG9341 specifications

Panasonic has long been a reputable name in the telecommunications industry, and its KX-TG series of cordless phones is no exception to this legacy. Notably, models like the KX-TG9332, KX-TG9331, KX-TG9343, KX-TG9333, and KX-TG9341 combine cutting-edge features with user-friendly technology, making them ideal choices for both home and office use.

First and foremost, these models showcase a sleek and modern design that fits seamlessly into any environment while providing superior functionalities. One of the standout features is the DECT 6.0 Plus technology, which enhances the clarity of sound and extends the range of the phones. This technology effectively minimizes interference, allowing users to enjoy uninterrupted conversations.

Another significant feature is the impressive battery life, with the phones offering up to 13 hours of talk time and up to 12 days of standby time. This ensures that users can remain connected without the frequent need for recharging. The KX-TG series also boasts a large, easy-to-read LCD display that simplifies navigation and usage.

The models come equipped with a digital answering machine, enabling users to manage missed calls effortlessly. This feature includes remote access capabilities, allowing users to retrieve messages away from home. Furthermore, the KX-TG9332, KX-TG9343, and other variants include a ‘Call Block’ feature, which can store unwanted numbers, preventing pesky telemarketer calls.

For families or larger households, the multi-handset functions are particularly advantageous. The KX-TG9332 and KX-TG9341, for instance, can support multiple handsets, helping users to stay connected throughout the home. Pairing these handsets is easy, further enhancing convenience.

Additionally, these models come with advanced features like intercom functionality, speakerphones, and customizable ringtones, improving user experience. They also support caller ID, making it easy to identify incoming calls and manage responses effectively.

In conclusion, the Panasonic KX-TG9332, KX-TG9331, KX-TG9343, KX-TG9333, and KX-TG9341 stand out as robust choices in the market of cordless telephones. They combine technological innovation with ease of use, making them perfect for anyone seeking reliability and functionality in their home communication system. Whether for personal use or as part of a business, these phones deliver on performance and style.
Top Page Image Contents