Preparation
once a month, otherwise the batteries may not charge properly. Clean more often if the unit is exposed to grease, dust or high humidity.
Battery strength
Battery icon | Battery strength |
5High
6Medium
7Low
When flashing: Needs to be charged.
Panasonic
Operation | Operating time |
In continuous use | 17 hours max. |
In continuous standby | 180 hours max. |
mode |
|
Bemærk:
L It is normal for batteries not to reach full capacity at the initial charge. Maximum battery performance is reached after a few complete cycles of charge/discharge (use).
L Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use (standby).
L Battery operating time may be shortened over time depending on usage conditions and ambient temperature.
L Even after the handset is fully charged, the handset can be left on the base unit or charger without any ill effect on the batteries.
L The battery strength may not be displayed correctly after you replace the batteries. In this case, place the handset on the base unit or charger and charge for at least 7 hours.
Turning the power on/off
Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
Symbols used in these operating instructions
Symbol Meaning
{j/OK} Press {j/OK}.
iProceed to the next operation.
“” Select the words in quotations shown on the display (e.g., “Indstil håndsæt”) by pressing {^} or {V}.
Display language
The display language is preset to English. Sample displays shown in these operating instructions are shown in Danish. To change the display language to Danish, press {ih}, press {j/OK}, press {^} 3 times, press {>}, press {V}
2times, press {>}, press {V}, press {>}, select “Dansk”, press {>}, then press {ih}.
To change the display language
1{j/OK}
2Press {^} or {V} to select “Indstil håndsæt”. i{>}
3Press {^} or {V} to select “Indstil display”. i{>}
4Press {^} or {V} to select “Vælg sprog”. i{>}
5Press {^} or {V} to select the desired language. i{>} i{ih}
10