Panasonic KX-TG7103NE Displays, Connections, Base unit Charge contact Ringer

Base unit

A B

C

ACharge contact

B{x} (Page)

CRinger

Displays

Display icons

Display Meaning icon

wWithin range of a base unit L When flashing: Handset is

searching for base unit. (out of range of base unit, handset is not registered to base unit, no power on base unit)

LHandset is accessing base unit. (intercom, paging, changing base unit settings, etc.)

kHandset is on an outside call.

5Battery strength

[2]Handset number (Standby display setting, side 15)

0New voice mail message received (side 19) (for Danish and Swedish users only)

Line is being used by another handset.

Connections

Base unit

When connecting the AC adaptor to the base unit, a short beep will be heard. If it is not heard, check the connections.

Hook

(220–240 V, 50 Hz)

To telephone network

Use only the included AC adaptor and telephone line cord.

Charger (KX-TG7102 and KX-TG7103 only) Connect the AC adaptor to the charger and route the cable as shown. The charger can be mounted on the wall, if required.

Screws

Use only the included AC adaptor.

Bemærk:

LWhen connecting the telephone line cord to the telephone network, use the included telephone