Base Unit Settings
Base unit settings
L Use the handset to customise the base unit.
L When customising the base unit, the current item or setting is indicated by >.
To customise the base unit:
1{j/OK}
2Press {^} or {V} to select “Indstil base”. i{>}
3Press {^} or {V} to select the desired item in the base unit settings menu. i{>}
4Press {^} or {V} to select the desired item in the
5Press {^} or {V} to select the desired setting then press {>} or follow the instruction in the “Feature” column of the chart.
L To exit the operation, press {ih}.
Base unit settings | Feature (default setting) | |
menu |
|
|
Ringestyrke | — | Base unit ringer volume (Medium) |
Opkaldsvalg | Genkald | Change the recall time (“100 msek.”).*1 |
|
| side 17 |
Andre valg |
| Change base unit PIN (“0000”).*2 |
|
| – Enter the current |
|
| iEnter the new |
|
| i{j/OK} |
| Repeater funk. | (“FRA”): side 21 |
*1 Change the recall time, if necessary, depending on the requirements of your service provider/telephone company or PBX.
*2 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre.
16