6 Press [ENTER]. |
|
|
|
SAVED | |||
• To continue storing other items, repeat |
|
|
|
from step 2. |
|
|
|
|
|
| |
•The display will return to step 1. To exit the programming mode, press [FUNCTION/EXIT] or wait for
60 seconds.
•If the display shows “PHONEBOOK FULL” in step 2, press [FUNCTION/EXIT] to exit. To erase other stored items from the Phone Book List, see page 28.
•You can exit the programming mode any time by pressing [FUNCTION/EXIT].
•If a pause is required for dialing, press [PAUSE] where needed. If required, you can also store [FLASH] in a phone number. Pressing [PAUSE] or [FLASH] counts as one digit (p. 29, 30).
•To store numbers for calling card access (see “Chain Dial” on page 26), we recommend you add pauses after each item. Storing pauses with numbers will prevent misdialing (p. 29). The delay time necessary will depend on your telephone company.
•When using the Call Restriction feature (p. 32), you cannot store the emergency number in the Phone Book.
•If the display shows “CALL RESTRICTED” in step 4, you cannot store the emergency number in the Phone Book. See page 32.
•When storing a name, you can also enter space by pressing [0] twice. Items with space at the beginning will be displayed with first priority.
See page 25.
To store an emergency number:
When storing a name in step 3 on page 22, enter # at the beginning of the name by pressing [#]. See page 24.
•Items with # at the beginning will be displayed with first priority if CALL RESTRICTION is set to ON. See page 32.
Advanced Operation
For assistance, please call: | 23 |