Panasonic KX-TSC11B Troubleshooting, Problem Cause and Remedy, While programming or

Troubleshooting

Problem	Cause and Remedy
The unit does not work.	• Check the settings (p. 6 – 14).
	• Remove the batteries and reinstall them
	to reset the unit.
The unit does not ring.	• The ringer selector is set to OFF. Set to
	HIGH or LOW (p. 11).
The display is blank.	• Install new batteries (p. 34).
You cannot dial.	• Check that the dialing mode selection is
	correct (p. 10).
	• The dialed number is restricted. To
	cancel, see page 32.
The other party suddenly	• [MUTE] may have been pressed during
cannot hear your voice	the conversation. If “	” is displayed,
during a conversation.	press [MUTE].
You cannot program items	• Programming is not possible when the
such as the dialing mode.	handset is off the cradle.
	• Do not pause for over 60 seconds while
	programming.

You cannot store a name and phone number in memory.

•When using the Call Restriction feature (p. 32), you cannot store an emergency number in the Phone Book List.

•If “PHONEBOOK FULL” is displayed, erase other stored items from the Phone Book List (p. 28).

•Programming is not possible when the handset is off the cradle.

•Check that the batteries are installed in the unit and that the battery power is not low.

•Do not pause for over 60 seconds while storing.

•Do not enter a phone number more than 22 digits long.

Useful

While programming or	• To answer the call, lift the handset. Start
searching, the unit starts to	again from the beginning after hanging
ring and stops the program/	up.
search.

Information

For assistance, please call: 1-800-211-PANA(7262) 35