Panasonic KX-TSC11B operating instructions Battery Replacement, Battery Precautions

Battery Replacement

If “ ” flashes, the battery power is low. Install new batteries as soon as possible. If batteries are not replaced even after the “ ” is displayed, the unit may not work properly.

- +

+-

-

+

2

1 Disconnect the telephone line cord from the unit.

2 Press down in the direction of the

arrow and remove the battery cover ( 1 ).

1	Replace the batteries with new
	3 ones using correct polarity (+, –)
	( 2 ), and close the battery cover.
	Connect the telephone line cord
	4 to the unit.

•After the battery replacement, the information stored in the Redial List will be cleared. Store the desired item in the Phone Book List and Caller List.

•The time will be shown as “12:00AM 12/31” or “0:00 12/31” after replacing the batteries, readjust the time and date.

Battery Precautions:

The batteries should be used correctly, otherwise the unit may be damaged by battery leakage.

—Do not mix different types of batteries.

—Do not charge, short-circuit, disassemble, heat or dispose of in fire. —Remove all the batteries when replacing.

Note:

—If you do not install the batteries or if the battery power is low, the time will be shown as “12:00AM 12/31” or “0:00 12/31”. Readjust the time and date after the battery replacement.

—Replace all the batteries every six months if using Alkaline batteries, or misoperation may occur. (When you use Manganese batteries, replace all of them every three months.)

—Do not use nickel-cadmium batteries.

34