Panasonic KX-TSC11B operating instructions Enter MONTH/DAY, Saved, For Caller ID service users p

8	Press [#] to select “AM”, “PM” or 24-
	hour clock.
	(Ex. You select “PM”.)

Display	Option
	AM
AM
PM	PM
	24-hour clock
(Blank display)

#=AM/PM

09:30PM12/31

Preparation

•Each time you press [#], the selection will change on the display.

9 Press [ENTER].

ENTER MONTH/DAY

09:30PM12/31

10

11

Enter the current day and month using a 4-digit number.

(Ex. To set Dec. 27, enter “1227”.)

Press [ENTER].

•The clock starts working.

•The display will return to step 2. To exit the programming mode, press [FUNCTION/EXIT] or wait for 60 seconds.

ENTER MONTH/DAY

09:30PM12/27

SAVED

•If the time and date entered are not correct, “ERROR” will be displayed and you cannot continue with setting. Enter the correct time and date.

If the batteries installed in the unit expired, the time and date will be shown as “12:00AM 12/31” or “0:00 12/31” while talking or after the battery replacement. Readjust the time/date.

For Caller ID service users (p. 16)

If a time display service is available with the Caller ID service:

The Caller ID information will re-set the clock after the ring if the adjusted time and/or date is incorrect. However, if the time/date has not previously been set, the Caller ID information will not adjust the clock.

For assistance, please call: 1-800-211-PANA(7262) 9