Panasonic KX-TGA715E Multi-unit operation, Handset, Registration i iRegister H.set, Base unit

TGA715E_717E(e-e).book Page 15 Wednesday, August 2, 2006 2:46 PM

	Basic Operations
Feature	Operation
Erasing all entries	{j/OK} i“Caller List” i{>} i{j/OK}
	“Erase All” i{>} i“Yes” i{>} i{ih}

Multi-unit operation

Feature	Operation
Intercom: calling	Example: When you call handset 1
	{INT} iPress {1} (desired handset number).
	LWhen finished talking, press {ih}.
Intercom: answering	Press {C}/{s}.
	LWhen finished talking, press {ih}.
Transferring calls between	Example: When you transfer a call to handset 1
handsets	During an outside call, press {INT}. iPress {1}
	(desired handset number). iWhen the handset 1
	answered, press {ih} to complete transfer.
Conference calls*1	Example: When you make a conference call with
(2 people can have a	handset 1
conference call with an outside	During an outside call, press {INT}. iPress {1}
party)	(desired handset number). iWhen the handset 1
	answered, press {3} to establish a conference call.
Manual registration	Handset:
	{j/OK} i“Handset Setup” i{>} i
	“Registration” i{>} i“Register H.set”
	i{>}
	Base unit:
	Press and hold {x} on the base unit for about 3
	seconds, until the registration tone sounds.*2
	Handset:
	Wait until “Enter Base PIN” is displayed, then enter
	the base unit PIN (default: “0000”).*3 i{j/OK}
	LWhen the handset has been registered successfully,
	w will stop flashing.
Cancelling a handset	{j/OK} i“Base Unit Setup” i{>} iEnter
	“335”. i“Cancel Handset” i{>} iSelect the
	handset(s) you want to cancel, by pressing the desired
	handset number. i{j/OK} i“Yes” i{>} i
	{ih}

*1 KX-TG7100 does not support conference call feature.

*2 After pressing {x}, the rest of this procedure must be completed within 1 minute. *3 If you forget the base unit PIN, consult your nearest Panasonic service centre.

Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333 15