Lucent Technologies 518-458-100 manual Feature Reference

Feature Reference

Overview

This chapter provides reference information for programming and using system features. Features are listed in alphabetical order. System Programming procedures include the procedure code (# and three-digit number) in the heading; dial-code features include the feature code (F for for I for i, plus a two- or three-digit code). Headings without codes are general call-handling topics or Telephone Programming procedures.

Each feature includes the following information, if applicable:

■	Description	■
■	Related Features	■
■	Considerations	■

■Valid Entries (✔ = factory setting)

Examples

Programming

Using

This chapter gives step-by-step instructions, using the following conventions:

■All of the instructions in this chapter assume that system phones select outside lines or pools first and standard phones select intercomStandard phones; Automatic Line Selection for first (as determined by each extension’s setting for Automatic Line Selection).

See Chapter 2 for a review of the methods and buttons you can use while in programming mode.

■Programming instructions tell you to use the Dbutton to change values for specific settings. You can, however, enter a value using the dialpad if you prefer. Similarly, there are different ways to exit programming mode as described in Chapter 2—use the method with which you are most comfortable.

■For Telephone Programming, this chapter provides only the instructions for Centralized Telephone Programming.

■Display prompts in the chapter are shown as they appear on PARTNER Endeavor-model phones.

5-1