Lucent Technologies 518-458-100 manual 174

Feature Reference

4.At this point:

■If you want to assign the pool to the first available button with lights, press Duntil the following appears on the display:

PoolAssign15P881

1Assigned

■If you want to remove a pool assignment, press Duntil the following appears on the display:

PoolAssign15P881

2 Not Assigned

■For auxiliary pools only, if you want to assign the pool to a specific button, press 3. The following appears on the display:

PoolAssign15P881

3 Select Button

Then press a button with lights to assign the auxiliary pool to that button. If you use option 3 after an auxiliary pool has been assigned, the auxiliary pool moves from the old button to the new button you select.

5.At this point:

■To assign another pool for this extension, press nor p until the pool access code shows on the display. Then repeat Step 4.

■To program another extension, press NPand begin at Step 2.

6.Select another procedure or exit programming mode.

5-174