Lucent Technologies 518-458-100 manual Ring on Transfer #119, 184

Feature Reference

Ring on Transfer (#119)

Description

This System Programming procedure lets you specify what callers hear while they are being transferred. If Ring on Transfer is set to Active, callers hear ringing as they are being transferred; if it is set to Not Active, callers hear silence unless Music-On-Hold is activated and an audio source is connected to the system. If this is the case, callers hear music while the call is being transferred to the destination extension. Once there, callers hear ringing until the call is answered or it is sent to the voice messaging system.

Related Features

■If you have an audio source connected to the system, set Music-On-Hold (#602) to Active and Ring on Transfer to Not Active, so callers hear music as they are being transferred to the destination extension.

■This procedure has no effect on Direct Extension Dial or Call Park.

Valid Entries

1 = Active ✔

2 = Not Active

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To change Ring on Transfer:

1.Press f00ss#11 9at extension 10 or 11.

2.Press Duntil the appropriate value displays.

3.Select another procedure or exit programming mode.

5-184