VMS Cover Rings (#117)

VMS Cover Rings (#117)

Description

This feature applies only if you have a voice messaging system.

This System Programming procedure, which applies to all system extensions programmed for VMS Cover, defines the number of times a call rings before it is sent to a user’s voice mailbox.

Related Features

VMS Cover also applies to lines that have been designated an owner with Line Coverage Extension (#208).

If an extension has VMS Cover or Automatic VMS Cover (#310) active, unanswered calls to that extension are routed to the voice messaging system after the specified number of VMS Cover Rings.

Valid Entries

1–9

3

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To change the number of times calls ring before being sent to the voice messaging system:

1.Press f00ss#11 7at extension 10 or 11.

2.Enter a setting (1–9). For example, to set VMS Cover Rings to 4, press Dor duntil the following appears on the display:

VMS Cover

4Rings

3.Select another procedure or exit programming mode.

5-221

Page 320
Image 320
Lucent Technologies 518-458-100 manual VMS Cover Rings #117, 221