Lucent Technologies 518-458-100 manual Recall F03, 179

Recall (F03)

Recall (F03)

Description

This feature causes the system to send a timed switchhook flash over the telephone line to “recall” a new dial tone or to access a PBX, central office, or Centrex feature, such as Call Waiting.

Related Features

■If users have trouble with Recall, use Recall Timer Duration (#107) to adjust the length of the Recall signal. Your local phone company can tell you the correct setting—for most Centrex systems, the correct setting is 800 msec. (or 32).

■You can press Sto insert a Recall signal in an Auto Dial or Speed Dial number, provided it is the first character in the stored number. (For examples, see Special Dialing Functions.)

Considerations

■Using Recall on an intercom call disconnects the call.

■Whenever your PBX or Centrex documentation tells you to press the switchhook when you are on an outside call, use the Recall feature instead. If you are already on a call, most PBX or Centrex systems require that you press the switchhook to get a new dial tone, then dial a feature access code to access a specific PBX or Centrex service.

—On a system phone, press a programmed button or press f0 3to use Recall.

—On a standard phone, first press and release the switchhook to get intercom dial tone, then send a Recall signal by pressing #03.

—On a (standard) feature phone that has a Recall or Flash button, first press the Recall or Flash button to get intercom dial tone, then send a system Recall signal by pressing #03.

■You can program a Recall button on a system phone to send a Recall signal with one touch.

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To program a Recall button:

1.Press f00sscat extension 10 or 11.

2.Enter the number of the extension to be programmed with this feature.

5-179