Lucent Technologies 518-458-100 manual System Programming Quick Reference

System Programming Quick Reference

Place the Programming Overlay on the dialpad of the system display phone at extension 10 or 11

TO START SYSTEM PROGRAMMING

PRESS f00 PRESS s PRESS s

TO END SYSTEM PROGRAMMING

PRESS f00

TO USE A SPECIFIC PROCEDURE

DIAL #and three-digit procedure code Example: #101for System Date

TO CYCLE THROUGH SYSTEM PROGRAMMING PROCEDURES

PRESS Nor P

NOTE: Procedures #399, #609, and #728—shown below in dashed boxes—are skipped when cycling.

TO CYCLE THROUGH AVAILABLE SETTINGS

PRESS Dor d

TO RETURN TO FACTORY SETTING

PRESS r

Dialing Restrictions and Permissions

OUTGOING CALL RESTRICTION

DIAL	#401	(p. 5-180)
DIAL	a system extension number
DIAL	1 = No Restriction ✓
	2 = Inside (intercom) Only
	3 = Local (intercom and
	local) Only
PRESS nto program
anotherextension
TOLL CALL PREFIX		(p. 5-237)
DIAL #402
DIAL 1 = 0/1 plus Area Code
	and Number ✓
	2 = Area Code and
	Number Only
SYSTEM PASSWORD		(p. 5-229)
DIAL #403

DIAL four digits to set the password

DISALLOWED PHONE NUMBER

LISTS	(p. 5-100)
DIAL	#404
DIAL	a list number (1–8)
DIAL	a list entry (01–10)
To add entry:
DIAL	the telephone number
	(up to 12 digits)

PRESS e

PRESS rto remove a list entry

PRESS nto program another list entry

To program another list:

PRESS NP, enter a new list number, and repeat above steps

DISALLOWED LIST ASSIGNMENTS

DIAL	#405		(p. 5-99)
DIAL	a system extension number
DIAL	a list number (1–8)
DIAL	1	= Assigned
	2	= Not Assigned ✓

PRESS nto assign another list

To program another extension:

PRESS NP, enter a new extension number, and repeat above steps

EMERGENCY PHONE NUMBER

LIST	(p. 5-112)
DIAL #406
DIAL	a list entry (01–10)
To add entry:
DIAL	the telephone number (up to

12digits)

PRESS e

PRESS rto remove a list entry

PRESS nto program another list entry

ALLOWED PHONE NUMBER

LISTS	(p. 5-10)
DIAL	#407
DIAL	a list number (1–8)
DIAL	a list entry (01–10)
To add entry:
DIAL	the telephone number (up to

12digits)

PRESS e

PRESS rto remove a list entry

PRESS nto program another list entry

To program another list:

PRESS NP, enter a new list number, and repeat above steps

ALLOWED LIST ASSIGNMENTS

DIAL #408 (p. 5-9)

DIAL a system extension number DIAL a list number (1–8)

DIAL 1 = Assigned

2 = Not Assigned ✓ PRESS nto assign another list

To program another extension:

PRESS NP, enter a new extension number, and repeat above steps

FORCED ACCOUNT CODE LIST

DIAL #409 (p. 5-122)

DIAL a list entry (01–99)

To add entry:

DIAL the account code (up to

6digits)

PRESS e

PRESS rto remove a list entry

PRESS nto program another list entry

STAR CODE DIAL DELAY

DIAL #410 (p. 5-221)

DIAL 0 = 0 Seconds Delay ✓ 1 = 1 Second Delay

2 = 2 Seconds Delay

3 = 3 Seconds Delay

4 = 4 Seconds Delay

5 = 5 Seconds Delay

6 = Not Active

System Speed Dial Numbers (p. 5-233)

To program a number:

PRESS f00to enter programming mode PRESS f DIAL a three-digit code (600–699)

DIAL the telephone number—up to 28 digits including special characters (see page

5-219)To “mark” it (to override restrictions), dial *before the telephone number

To program another number, or to change a number, repeat

PRESS f00to exit programming mode

To remove a number:

PRESS f00to enter programming mode

PRESS f

DIAL the System Speed Dial number’s code (600–699)

PRESS !

To remove another number, repeat

PRESS f00to exit programming mode