Lucent Technologies 518-458-100 manual Intercom Dial Tone #309, 123

Intercom Dial Tone (#309)

Intercom Dial Tone (#309)

Description

This System Programming procedure determines the type of dial tone that the system provides at an extension. It may be necessary to change this setting to Machine (outside line) dial tone for an autodialing device, such as a fax or modem, that has trouble making calls. For example, if you have a modem that checks for outside line dial tone before dialing, use this procedure to change from Regular to Machine dial tone.

Considerations

Use this procedure only if an autodialing device has trouble making calls.

Valid Entries

1 = Regular dial tone ✔

2 = Machine (outside line) dial tone

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To change the Intercom Dial Tone setting for an extension:

1.Press f00ss#30 9at extension 10 or 11.

2.At the Extension: prompt, enter the number of the extension to be programmed. For example, to select extension 22, press 22.

3.To change the Intercom Dial Tone setting, press Duntil the appropriate value displays.

4.To program another extension, press nor puntil the extension number shows on the display. Then repeat Step 3.

5.Select another procedure or exit programming mode.

5-123