Lucent Technologies 518-458-100 manual Programming, 114

Feature Reference

Programming

(See Figure 2-2on page 2-19for the location of special programming buttons such as sand eon system phones.)

To program a Pickup Group button:

1.Press f00sscat extension 10 or 11.

2.Enter the number of the extension to be programmed with this feature.

3.Press a programmable button.

4.Press left i66.Dial a Pickup Group number (1–4).

5.Program another button for this extension or exit programming mode.

Using

System Phone

To use Group Pickup when programmed on a button, press the programmed button.

To use manually:

1.Lift the handset and press i. You hear intercom dial tone.

2.Dial 6 6and a group number (1–4) to pick up a call ringing at any extension in the group.

Standard Phone

To use Group Pickup:

1.Lift the handset.

You hear intercom dial tone.

2.Dial 6 6and a group number (1–4) to pick up a call ringing at any extension in the group.

5-114