Lucent Technologies 518-458-100 manual Backup and Restore Features

Programming

—VMS Hunt Schedule (#507) determines when outside calls should ring the VMS Hunt Group (always, day only, or night only) depending on the status of the Night Service Button (#503) at extension 10.

—Automatic VMS Cover (#310) determines whether or not an extension’s unanswered intercom and transferred calls and outside calls on lines assigned ownership are automatically covered by the voice messaging system.

—VMS Cover Rings (#117) specifies the number of times intercom and transferred calls or outside calls on lines assigned ownership ring at extensions before they are sent to the voice messaging system.

—Transfer Return Extension (#306) identifies the extension to which a call transferred by the voice messaging system should be routed if the destination extension does not answer and does not have voice mail coverage active. (The transfer return extension for the voice messaging system is typically extension 10.)

NOTE:

If an extension has VMS Cover and Call Coverage active, intercom and transferred calls and outside calls on lines assigned ownership ring at the covering extension after the specified number of Call Coverage Rings (#116). Then:

■If the covering extension does not answer, the call is routed after the specified number of VMS Cover Rings (#117) to the voice mailbox of the extension that activated Call Coverage.

■If the covering extension has Do Not Disturb active, the call is immediately routed to the voice mailbox of the extension that activated Call Coverage.

Backup and Restore Features

The PARTNER Endeavor 362 processor module has one PC Card slot. This slot functions similarly to a floppy drive on a PC, in that information can be added to the system or copied from the system using a PC Card inserted into the slot. To use the optional Backup and Restore features of the system, you must purchase a Backup/Restore PC Card from Lucent Technologies. Only these Lucent Technologies PC Cards can be used in the PARTNER Endeavor processor module. The same PC Card stores both automatic and manual backups separately. To install a Backup/Restore PC Card, see PARTNER PC Card Installation Instructions.

Backup Programming—Automatic (#123) enables you to specify whether automatic backups should be performed or not. If you set this feature to “Active,” your system and telephone programming settings are backed up to the PC Card automatically at 2:00 a.m. on the first day of each month. The PC Card must be present in the PC Card slot for the backup to take place.

2-16