Lucent Technologies 518-458-100 manual Battery Replacement

Battery Replacement

Battery Replacement

IMPORTANT:

Do not turn off the power or remove the processor module before replacing the batteries! If you do, all settings for system and telephone programming will revert to the default settings. If you have a Backup/Restore PC Card, it is highly recommended that you do a backup before changing the batteries.

Display Shows “ChgBat W/PowerOn” at

Extensions 10 and 11

Possible Cause: System battery power is low.

What to do: Replace the system batteries. See instructions below.

The PARTNER Endeavor 362 processor module uses two user-replaceable AAA alkaline batteries. These batteries provide enough power to retain the system programming settings during a power failure for 45 days to six months, depending on the freshness of the batteries. When battery power is getting low, the system displays a ChgBat W/PowerOn message on the top line of display phones at extensions 10 and 11 in place of the default day/date/time message. Users at these extensions should be instructed to notify you when they see this message. You should replace the batteries within 45 days of seeing the message.

NOTE:

The message may flicker on and off as the batteries approach the low-power threshold.

It is recommended that you change the batteries in the processor module every year, even if the system has not yet displayed the ChgBat W/PowerOn message. Choose good quality alkaline batteries.

Use the following procedure to replace the batteries.

6-5